In the operation of aluminum wire drawing machine, the safety issue is crucial, and special attention needs to be paid to the following aspects to ensure the safety of operators and equipment:

1. Personal Protective Equipment

Wear protective equipment: Operators must wear personal protective equipment, including hard hats, safety glasses, earplugs and protective gloves. These devices can effectively reduce the damage caused by flying objects, noise, etc.

Protective clothing and work shoes: Wear protective clothing to avoid direct skin exposure to possible hazardous environments. At the same time, wear non-slip shoes and lace them to prevent slipping or falling on the work surface.

2. Check and maintain the device

Check before starting: Before starting the aluminum wire drawing machine, it is necessary to check whether the components are abnormal, including the power line, the motor, the transmission system, the mold and the lubrication system. Confirm that everything is normal before starting.

Regular maintenance: Regular maintenance of the equipment, such as cleaning the dust in the machine, checking the loosening of fasteners, replacing worn parts, etc., to ensure the stable operation of the equipment.

3. Operation specifications

Technical training: Operators must go through technical training, be familiar with the operating procedures and safety specifications of the equipment, and be able to deal with problems in the use of the equipment.

Certificate: to ensure that the operator has a certificate to work, strictly abide by the operating procedures and safety system.

Avoid overload operation: It is forbidden to overload the equipment to prevent damage to the equipment or cause safety accidents.

4. Working environment and safety measures

Clean work place: Keep the work place clean, clean waste silk, waste film and other obstacles in time, reduce the risk of tripping and slipping.

Check the operating platform: When working at a higher position, you must check the stability of the operating platform or tread mat to ensure stability and no shaking.

Emergency shutdown device: familiar with and master the use of emergency shutdown device, once an emergency can quickly cut off the power to stop the operation of the equipment.

5. Aluminum wire processing

Aluminum cable placement: When placing aluminum cables on the cable pay-off rack, do not press, mess, or twist the cables. Ensure that the aluminum cables are not hard folded to avoid breakage or device damage during wire drawing.

Tension control: reasonable control of the tension of the aluminum wire, to avoid excessive tension resulting in aluminum wire break or too small tension affecting the drawing effect.

6. Lubrication and cooling

Lubrication system: To ensure the normal operation of the lubrication system, the bearings of each component should be regularly added oil, butter and other lubricants to maintain a good lubrication state.

Cooling system: For the aluminum wire drawing machine that needs to be cooled, ensure that the cooling system works properly to avoid the embrittlement or fracture of the aluminum wire due to overheating.

To sum up, the operation of aluminum wire drawing machine should pay attention to personal protective equipment inspection and maintenance, operating standards, working environment and safety measures, aluminum wire treatment, lubrication and cooling and other aspects of safety issues. The safety of the operator and the equipment can be ensured by strictly observing the safety operation procedures and taking effective safety measures.